Continuous dust monitoring
in ambient air
Monitoring of dust concentration in control system areas, silo areas, boiler houses or work stations.
- The creation of dust explosion zones can be prevented.
- Dust concentrations at work stations are safely monitored.
- Possible dust escape from system parts is quickly detected.
- AirSafe can be used as early detection for dust which could endanger the workplace.
- Also for applications in zone 22 dust.
Triboelectric sensor technology from SWR has proven itself in thousands of applications for measuring dust concentrations in process systems.
AirSafe is a new measuring instrument which can monitor the dust concentration in ambient air, for example in control system areas, silo areas, boiler houses or work stations.
AirSafe monitors concentrations on the basis of pre-set limit values.
For example, to avoid the accumulation of dust in explosion zones or to detect unnoticed accumulation of dust from processes.
AirSafe can be used as early detection for dust which could endanger the workplace.
AirSafe consists of a flow duct and an integral triboelectric dust sensor.
A current of air is drawn through the duct at approximately 100 m3/h.
Dust particles, carried in the air current, passes the sensor, this generates a charge transfer, which is used as the measurement signal.
This signal is converted to electrical process outputs which could be used for display or control.
The AirSafe flow duct is 500 mm long and 100 x 100 mm square.
The integral dust sensor has a relay output which energises when the set limit value is exceeded.
The unit is supplied pre-calibrated.
The alert point is set to approximately 25 mg/m³ of dust.
The user can set his own alarm threshold.
This may be set within a range of approximately 5 mg/m³ to 150 mg/m³.
The alert point can be changed in steps of 5 mg by simply pressing a button.
As well as a contact closure output, the sensor also has an RS 485 output which can be connected to a wall mount or DIN rail mount transmitter.
The output from the transmitter is a standard 4 . . . 20 mA process output.
The transmitter also has a ModBus RTU RS 485 output which can also be used for connection to a PC.
By using the visualisation software, up to 10 measuring points can be displayed and saved and can be interfaced to other computer programs, e. g. Excel.
AirSafe can be installed anywhere in a room.
Except of high ambient temperatures, there is no need to maintain distances from units or walls.
AirSafe can be wall-mounted using brackets provided.
|Sensor||Measured objects||Solid particles in a gas stream|
|Particle size||0.3 µm or larger|
|Measurement range||From 0.1 mg/m<sup>3</sup>|
|Ambient temperature||- 20 . . . + 60 °C|
|Humidity||95 % RH (non condensing)|
|Damping time||1 s|
|Output signals||Relay output, either NC or NO|
|Dimensions||500 x 100 x 240 (L x W x H)|
|Protection type||IP 65|
|Power supply||24 ± 10 % V DC|
|Rating||Max. 10 W|
|Electrical connection||Screw terminals|
|Transmitter (DIN rail)||Power supply||24 ± 10 % V DC|
|Power consumption||20 W / 24 VA|
|Protection type||IP 40 to EN 60 529|
|Ambient operating temperature||-10 … +45 °C|
|Dimensions||23 x 90 x 118 (W x H x D)|
|Weight||Approx. 172 g|
|Connection terminals conductor cross-section||0.2 - 2.5 mm<sup>2</sup> [AWG 24-14]|
|Current output signal||4 … 20 mA (0 … 20 mA), load < 500 Ω|
|Switch output - measurement alarm||Relay with switchover contact, max. 250 V AC, 1 A|
|Interface||ModBus (RS 485)|
|Data backup||Flash memory|
Click on a desired application example to navigate to a detailed description.