LEAK LOCATE 320 - filter damage and leakage monitoring

You are here:Home · Products · LEAK LOCATE 320 - filter damage and leakage monitoring
 

LEAK LOCATE 320 -
filter damage and leakage monitoring

Electrodynamic filter damage and leakage monitoring
of industrial multi chamber filter systems

  • proactive multi chamber filter monitoring
  • identification of upcoming filter damages
  • identification of the filter chamber affected by filter breakage
  • reduction of material-, downtime- and maintenance costs
  • flue-gas temperatures up to 150 °C (optional 250 °C)
  • for dry applications
  • 4 sensors inclusive
  • expandable up to 32 sensors
  • digital inputs and outputs
  • external connections: USB 2.0 (type A), ethernet (RJ45/100 Mb/s)

What do you want to do?

Use

LEAK LOCATE 320 serves primarily to detect filter damages or incoming filter breaks at an early stage.
The key advantage of the LEAK LOCATE 320 system is the ability to locate the filter selection where the damage occurred.
Further features with LEAK LOCATE 320:

  • advance warning at degradation of the filter
  • significant savings in time and costs of maintenance
  • to reduce probability of large emission incidents


 

Function

LEAK LOCATE 320 uses the electrodynamic measurement principle. If the dust to be measured is constant, then the generated measuring signal is proportional to the dust concentration, even if there are dust deposits on the measuring probe. Experience shows that the measuring method provides very exact results with little required maintenance.

A complete measuring system consists of these components:

  • Welded casing to serve as a sensor receptacle
  • LEAK LOCATE 320-sensor

Technical Data

Sensor Ambient Air Temperature -20 ... +50 °C
  Stack Gas Temperature 125 °C standard or 250° C option
  Stack Connection 1½ BSPT, ½ BSPP, NSPM, NPT
  Enclosure Rating IP 65
  Rod Length 100 mm to 1000 mm
  Air Purge Connection ½ inch BSPP
½ inch NPSM
1½ inch BSPT or NPT
  Power Requirements 24 V DC (from PLUS-Controller)
  Sensor probe check Automatically (optional)
PLUS Controller Data Number of sensors 4 up to 32 sensors
  Ambient Air Temperature -20 ... +45 °C
  Power Requirements 100 ... 240 V AC, 1 A
  Data-Logs Impulse (4 hours @ 1 s for 4 sensors)
  Ethernet ModBus TCP
  Outputs (standard) 1 x RS 485 (ModBus RTU)
4 Relais (2 A @ 250 V, user configurable)
 
 

Quickfinder: What are you searching?