You are here:
The microwave sensor for continuous moisture measurement including flow detection for solids
Simple retrofitting for measurement in container outlets, conveyor screws, on conveyor belts, slides etc.
- Moisture ranges 0 ... 65 % (depending on material)
- Measurement accuracy 0.1 %
- Online moisture measurement
- Flow detection alarm
- Independent of the material colour
- Temperature-resistant up to 120 °C
- Recording of surface moisture and capillary moisture
M-Sens 2 FD is especially designed for continuous moisture measurement of solids during batching. This includes aswell discontinuous measurement.
M-Sens 2 FD is used for online moisture measurement of:
- all types of dust, powder, granulates and other bulk solids
- in different mounting positions
M-Sens 2 FD is characterized by its uncomplicated installation as well as by its simple calibration. Due to its hygrostability and its resistance to mechanical shocks and abrasion the entire sensor is very fail-safe and allows a long service life. The sensor window is protected by a ceramic disc being very resilient with regard to abrasion and pressure.
The M-Sens 2 FD sensor functionality is based on precise high-frequency measurement and direct digitalization of measured values, where from results a high resolution.
As the materials surface and capillary moisture influences strongly its specific conductive capacity, the moisture can be measured exactly by a constant averaged bulk density.
The calibration can be done very simply by the operator by pressing the button and entering the referenced moisture contents. In this context it is convenient that measured value fluctuations by bulk density variations are balanced by an internal filter function. Additionally, measured value fluctuations by temperature variations are compensated automatically by the sensor.
The M-Sens 2 FD was developed to offer maximum flexibility during assembly. The following aspects should be taken into account in the positioning of the probe: The measuring field penetrates the densest materials (e. g. sand). With a minimum depth of 120 mm, the probe should always be directed at the material to avoid reflection problems.
For a simple installation, a standard connection flange is available.
Measurement of material moisture on a conveyor belt.
A constant material height is generated by attaching a material skimmer. This offers ideal conditions for an online measurement.
The installation in the lower third of a conveyor screw has the advantage that the material volume that passes over the sensor is almost constant, allowing for an optimal measurement. The movement of the auger flights is hidden.
Free fall pipe
To be able to measure in free fall pipes or inclined pipes (chutes) with the M-Sens 2 FD, it is possible to gather material in front of the probe in the short term, for the duration the measurement, with a catching mechanism. After the measurement, the flap will open again and allows the gathered material to continue to drop. The measuring process can be permanently repeated in short or long intervals according to requirements.